Sonel PAT-1 - Page 16

OPERATING MANUAL PAT-1, PAT-2, PAT-2E, PAT-10 version 1.02
14
When the r Ln screen is displayed use
and to turn: on ( ) or off ( ).
Use and
to enter the screen that al-
lows to select the tester's response when
the L and N are swapped in the polarity
test of IEC cord: IEC
When the IEC screen is displayed
use and
to set the outcome result
for swapped L and N: Negative test result
(FAIL) or set the tester to allow swapped L
and N lines (PASS).
Use and
to enter the screen where
time and date can be set
- (Date): DAtE