Sonel PAT-1 - Deleting the Entire Memory Data

OPERATING MANUAL PAT-1, PAT-2, PAT-2E, PAT-10 version 1.02
63
or
Press ENTER button again to delete
the selected bank.
After deleting the bank, the tester
beeps three times. Press ESC to can-
cel and return to memory browsing
mode.
The content of the bank has been deleted, the first cell of the deleted bank is selected.
5.3.3 Deleting the entire memory data
Press MEM button to enter the
memory browsing function: MEM
(LED is on).
Set the bank num-
ber as ‘- -’ (before
‘1’)...