Sonel PAT-1 - Deleting Bank Data

OPERATING MANUAL PAT-1, PAT-2, PAT-2E, PAT-10 version 1.02
62
5.3.2 Deleting bank data
Press MEM button to enter the memory
browsing function: MEM (LED
is on).
Set the bank number
to be deleted acc. to
point 5.2.
Set the cell number
as ‘- -’ (before “01’)
below screen will ap-
pear.
Then symbol dEL will
be displayed to indi-
cate the readiness for
deleting.
Press ENTER button.
and ConF sym-
bols appear, asking
to confirm deletion.