Sonel PAT-1 - 3 Tester Configuration

OPERATING MANUAL PAT-1, PAT-2, PAT-2E, PAT-10 version 1.02
9
3 Tester configuration
The tester configuration can also be performed using PC software.
Turn on the tester by pressing and
keeping SET/SEL button pressed.
When the rtSt (re test) screen is dis-
played use and
buttons to set the
retest time (in months). Based on this in-
formation the tester will calculate the re-
test time that will show up on the printout.
Select oFF to switch off this function.
Use and
to enter the autotest con-
figuration screen: Atst.
When Atst (Autotest) screen is displayed
use and
to turn the tests to be per-
formed automatically: on
( +
) or off ( ).
Use and
buttons to enter the
screen with audio message settings: