Sonel PAT-1 - Storing the Measurement Results in the Memory

OPERATING MANUAL PAT-1, PAT-2, PAT-2E, PAT-10 version 1.02
58
5.1 Storing the measurement results in the memory
After completing measurement press ENTER.
The tester will turn into the mode for storing the
test results.
The cell is empty.
A cell occupied by a
single test result. An
icon indicating the
test type and the
main result is dis-
played on screen.
A cell occupied by
AUTO test, IEC or
PRCD test result
(corresponding icons
for subsequent tests,
along with results are
displayed on screen).
Use and buttons to preview the results
stored in the selected cell. If any.
To change the cell number or bank number: