Sonel PAT-1 - Label Types

OPERATING MANUAL PAT-1, PAT-2, PAT-2E, PAT-10 version 1.02
69
6.1.5 Label types
There are two printout formats that can be used. The two types vary in the amount of measurement
data on them. If the standard report has been selected ( ),the tester will print the user data, dates
and the general test or AUTO test sequence result:
Standard report (label) for: positive test result negative test result.
If the full report has been selected ( ),the tester will print the same set of data as in standard
report, and additionally it will include a single test results:
Full report (label) for: positive test result negative test result.