SONOSAX SX-R4
+
User manual / Hardware description Page 9 of 12
POWERING THE SX-R4
+
The SONOSAX SX-R4+ can be powered from a removable "Smart Battery" or from any external power source providing
a regulated DC voltage between 9 to 18 Volts.
The SX-R4+ features an intelligent power management through the SMBus and provides with detailed on screen
informations. Please refer to the menu [POWER] for further informations.
3.2.10 Internal "Smart Battery"
The battery enclosure is designed for the so called "Smart Battery" of the 2050 series having a nominal voltage of 10,8
or 14,4Volts. The Smart Batteries communicate with the SX-R4+ through the SMBus, providing precise indications such
as remaining charge and running time.
Two different battery lengths are currently available:
• 86,4mm / 3,4" fits in the enclosure and is secured by the battery locking pin
• 152,4mm / 6" longer version with higher capacity; extending outside the enclosure it has to be
secured in the bag by a strap or other means.
Compatible Smart Batteries:
Inspired Energy 2050 series: ND 2054 / 14,4V - 3,4Ah - 45Wh
NH 2054 / 14,4V - 6,8Ah - 98Wh - extended version **
NL 2054 / 14,4V - 6,8Ah - 97Wh - extended version ** low temperature
NL 2050 / 10,8V - 8,8Ah - 97Wh - extended version ** low temperature
Chargers: Mono: CH4000 charger / CH5000 calibrator
CH7000E, with European main adapter, 12 to 24V, solar, vehicle
CH7000A, with US / Japan main adapter, 12 to 24V, solar, vehicle
CH7000U, with UK main adapter, 12 to 24V, solar, vehicle
Dual: CH4040 charger / CH5050 calibrator
RRC 2050 series: RRC2054 / 14,4V - 3,2Ah - 46Wh
NH 2054 / 14,4V - 6,8Ah - 98Wh - extended version**
Chargers: PMC02A or PMC10A or RRC-SMB-UBC
AudioRoot eSmart series: eSMART Li 49 / 14,4V - 3,1Ah - 45Wh
eSMART Li 89 / 14,4V - 6,2Ah - 89Wh - extended version**
Chargers: eSMART Mono charger or Dual charger with LCD display
eLC-SMB simple mono charger without display
Dimensions of compatible Smart Batteries:
Height: 22,9mm / 0,9"
Width: 78,7mm / 3,1"
Length: 86,4mm / 3,4" for 45 & 49Wh
**152,4mm / 6,0" for 89Wh and above (extends outside the enclosure)
NOTE: The battery can not be recharged by the SX-R4+; it must be recharged by its own specific charger.
WARNING: Each battery manufacturer may implement its own proprietary firmware; therefore, generally speaking,
batteries should only be operated with chargers or other devices made by the same manufacturer.
If your batteries do operate with chargers or devices made by another manufacturer it may be a
fortunate coincidence.
SONOSAX has no knowledge of possible compatibility or interoperability between batteries and
chargers or devices of different manufacturers. If you choose to operate a battery of a manufacturer
with chargers or devices made by another manufacturer you do so at your own risk.
To Next Page
Loading...