S2/S2BW
Digital Color Doppler Ultrasound System
Chapter 13
Transducers
This ultrasound system supports a wide range of probes which make the system remarkably versatile. This
chapter provides the transducer information and the guidance for the use and maintenance of the transducers.
Warning!
Review to Chapter 2, especially Section 2.3 and Section 2.5, for safe use of the transducers.
13.1 Transducer Information
13.1.1 Supported Transducers
The following transducers are supported by this ultrasound system:
C362, C344, L741, L742, L743, 6V1, 6V3, 2P1, 5P1,
C611, VC6-2, 10L1, 10I2, 6V1A, C311, C354
Table 13.1: Supported transducers
Attention!
To avoid electric shock or damage the equipment:
1. Use only the supported transducers with this ultrasound system.
2.
Do not use the SonoScape transducers on other ultrasound systems not manufactured by
SonoScape.
13.1.2 Acoustic Output
The acoustic output powers for the supported transducers are listed in the
Acoustic Output Tables
in the
companion CD-ROM of this manual.
13.2 Environmental Requirements
The transducers should be used with that the following environmental requirements has been satisfied.
P/N: 4710.00149A01
13-1
To Next Page
Loading...
Need help?
General
