Sony alpha 9 III - Page 112

ILCE-9M2
5-010-473-11 (1)
GB
112
C:\5010473111\5010473111ILCE9M2IN5\01GB-ILCE9M2IN5\030BAS.indd
DTP data saved: 2019/07/26 13:31
PDF file created: 2019/08/06 10:22
To set the exposure compensation using the MENU
You can adjust the exposure compensation value within a range of -5.0EV
to +5.0EV when the exposure compensation dial is set to “0.”
MENU  (Camera Settings 1)  [Exposure Comp.] 
desired setting.
Hint
• You can operate the exposure compensation dial any time you want while the
exposure compensation dial lock is released. The exposure compensation dial
lock prevents unintentional changes to exposure compensation values.
Note
• You cannot perform the exposure compensation in the following shooting
modes:
– [Intelligent Auto]
• When using [Manual Exposure], you can perform the exposure compensation
only when [ISO] is set to [ISO AUTO].
• The settings of the exposure compensation dial will be prioritized over
[Exposure Comp.] or [Dial Ev Comp] in MENU.
• Only a value between -3.0EV and +3.0EV with the equivalent image
brightness appears on the screen when shooting. If you set an exposure
compensation value outside this range, the image brightness on the screen
will not be affected, but the value will be reflected in the recorded image.
• You can adjust the exposure compensation value within the range of -2.0EV
to +2.0EV for movies.
• If you shoot a subject in extremely bright or dark conditions, or when you use
the flash, you may not be able to get a satisfactory effect.
• When you set the exposure compensation dial to “0” from a setting other
than “0,” the exposure compensation value switches to “0” regardless of the
[Exposure Comp.] setting.