ILCE-9M2
5-010-473-11 (1)
GB
28
C:\5010473111\5010473111ILCE9M2IN5\01GB-ILCE9M2IN5\020PRE.indd
DTP data saved: 2019/07/26 13:31
PDF file created: 2019/08/06 10:22
To change the functions in the function menu
(Function Menu Set.)
The following is the procedure for changing [Drive Mode] in the function
menu for still images to [Grid Line].
• To change the movie function menu, select a movie function menu item
in Step
.
MENU (Camera Settings 2) [Function Menu Set.].
Select (Drive Mode) from among the twelve still
image function menu items using the top/bottom/left/
right side of the control wheel, and then press the center.
Move to the [Display/Auto Review] screen using the left/
right side of the control wheel. Then, select [Grid Line] and
press the center of the control wheel.
• (Grid Line) will be displayed in the former location of
(Drive Mode) in the function menu.
How to use the Quick Navi screen
The Quick Navi screen is a function optimized for shooting with the
viewfinder, that lets you control settings directly.
1
MENU (Camera Settings 2) [DISP Button]
[Monitor].
2
Place a mark on [For viewfinder] and then select [Enter].
3
Press the DISP on the control wheel to set the screen mode to
[For viewfinder] (page 34).
To Next Page
Loading...
