ILCE-9M2
5-010-473-11 (1)
GB
164
C:\5010473111\5010473111ILCE9M2IN5\01GB-ILCE9M2IN5\050PLY.indd
DTP data saved: 2019/07/26 13:31
PDF file created: 2019/08/06 10:23
Setting the method for jumping between images
(Image Jump Setting)
Sets which dial and method to use for jumping between images during
playback. This function is useful when you want to find one of many
recorded images. You can also quickly find protected images or images
set with a particular rating (page170).
MENU (Playback) [Image Jump Setting] desired item.
Select Dial: Selects the dial to use for jumping between images.
Image Jump Method: Sets the method for playing back with Image Jump.
Note
• A group is counted as an image when [Image Jump Method] is set to
[One by one], [By 10 images], or [By 100 images].
• When [Image Jump Method] is set to a parameter other than [One by one],
[By 10 images], or [By 100 images], Image Jump will only be available if
[View Mode] is set to [Date View]. If [View Mode] is not set to [Date View], the
camera will always play back every image without jumping when you use the
dial selected with [Select Dial].
• When you use the Image Jump function and [Image Jump Method] is set to a
parameter other than [One by one], [By 10 images], or [By 100 images], movie
files are always skipped.
To Next Page
