Sony alpha 9 III - Customizing the functions of the dial; Registering functions to “My Dial”

ILCE-9M2
5-010-473-11 (1)
GB
181
Customizing the camera
C:\5010473111\5010473111ILCE9M2IN5\01GB-ILCE9M2IN5\060SET.indd
DTP data saved: 2019/07/26 13:31
PDF file created: 2019/08/06 10:23
Customizing the functions of the dial
Changing the function of the dial temporarily
(My Dial Settings)
You can assign the desired functions to the front dial, rear dial, and control
wheel, and register up to three combinations of settings as “My Dial”
settings. You can quickly recall or switch registered “My Dial” settings by
pressing the custom key you assigned in advance.
Registering functions to “My Dial”
Register the functions that you want to assign to the front dial, the rear
dial, and the control wheel as [My Dial 1] through [My Dial 3].

MENU  (Camera Settings 2)  [My Dial Settings].

Select a dial or wheel for (My Dial 1), and press the
center of the control wheel.

Select the desired function to assign using the top/
bottom/left/right sides of the control wheel, and then
press the center of the control wheel.
• Select “--” (Not set) for a dial or wheel to which you do not want to
assign any function.

After you select functions for all of the dials and the wheel
in (My Dial 1) by repeating Steps  and , select [OK].
The settings for (My Dial 1) will be registered.
• If you want to register (My Dial 2) and (My Dial 3) as well,
follow the same procedure as described above.