ILCE-9M2
5-010-473-11 (1)
GB
114
C:\5010473111\5010473111ILCE9M2IN5\01GB-ILCE9M2IN5\030BAS.indd
DTP data saved: 2019/07/26 13:31
PDF file created: 2019/08/06 10:22
Note
• [Metering Mode] is locked to [Multi] in the following shooting modes:
– [Intelligent Auto]
– Other zoom functions than the optical zoom
• In [Highlight] mode, the subject may be dark if a brighter part exists on the
screen.
Face Priority in Multi Metering
Sets whether the camera measures brightness based on detected faces
when [Metering Mode] is set to [Multi].
MENU (Camera Settings 1)
[Face Priority in Multi Metering] desired setting.
On: The camera measures brightness based on detected faces.
Off: The camera measures brightness using the [Multi] setting, without
detecting faces.
Note
• When the shooting mode is set to [Intelligent Auto],
[Face Priority in Multi Metering] is locked to [On].
• When [Face/Eye Priority in AF] is set to [On] and [Subject Detection] is set to
[Animal] under [Face/Eye AF Set.], [Face Priority in Multi Metering] does not
work.
To Next Page
