Sony alpha 9 III - Connecting the camera and a smartphone

ILCE-9M2
5-010-473-11 (1)
GB
205
Using network functions
C:\5010473111\5010473111ILCE9M2IN5\01GB-ILCE9M2IN5\070WRL.indd
DTP data saved: 2019/07/26 13:31
PDF file created: 2019/08/06 10:23
Connecting the camera and a smartphone
Using a smartphone as a remote control for the camera
With Imaging Edge Mobile, you can shoot images while checking the
shooting range of the camera on the monitor of a smartphone.
1
MENU  (Network)  [Ctrl w/ Smartphone] 
[Ctrl w/ Smartphone], then select [On].
2
Set up the camera and smartphone by following the procedure
below.
To establish a one-touch connection with an NFC-enabled
smartphone

Activate the NFC function of the smartphone.
• On an iPhone/iPad, launch Imaging Edge Mobile, and then select
[Scan NFC/QR Code of the Camera]  [Scan NFC of the Camera] to
activate the NFC function.

Switch the camera to the shooting mode.

Touch the (N-Mark) on the camera to the smartphone
for 1-2 seconds.
• If you are using an Android smartphone, touch the (N-Mark) on
the camera to the (N-Mark) on the smartphone.
Note
• If you cannot connect the camera to the smartphone using the NFC
function, follow the procedure under “To establish a Wi-Fi connection with a
smartphone using a QR code.”