ILCE-9M2
5-010-473-11 (1)
GB
127
Shooting
C:\5010473111\5010473111ILCE9M2IN5\01GB-ILCE9M2IN5\030BAS.indd
DTP data saved: 2019/07/26 13:31
PDF file created: 2019/08/06 10:22
Capturing a standard white color to set the white balance
(custom white balance)
In a scene where the ambient light consists of multiple types of light
sources, it is recommended to use the custom white balance in order to
accurately reproduce the whiteness. You can register 3 settings.
1
MENU (Camera Settings 1) [White Balance] Select
from among [Custom 1] to [Custom 3], and then press the right
side of the control wheel.
2
Select , and then press the center of the control wheel.
3
Hold the product so that the white area fully covers the white-
balance capture frame, and then press the center of the control
wheel.
After the shutter sound beeps, the calibrated values (Color Temperature
and Color Filter) are displayed.
• You can adjust the position of the white-balance capture frame by
pressing the top/bottom/left/right side of the control wheel.
• After capturing a standard white color, you can display the fine
adjustment screen by pressing the right side of the control wheel.
You can finely adjust the color tones as needed.
4
Press the center of the control wheel.
The calibrated values will be registered. The monitor returns to the
MENU display while retaining the memorized custom white balance
setting.
• The registered custom white balance setting will remain memorized
until overwritten by another setting.
To Next Page
