Sony alpha 9 III - Marker Settings

ILCE-9M2
5-010-473-11 (1)
GB
156
C:\5010473111\5010473111ILCE9M2IN5\01GB-ILCE9M2IN5\040MOV.indd
DTP data saved: 2019/07/26 13:31
PDF file created: 2019/08/06 10:23
Marker Settings
Marker Display
Sets whether or not to display markers set using [ Marker Settings] on
the monitor or the viewfinder while shooting movies.
MENU  (Camera Settings 2)  [ Marker Display] 
desired setting.
On: Markers are displayed. The markers are not recorded.
Off: No marker is displayed.
Note
• The markers are displayed when the mode dial is set to (Movie) or , or
when shooting movies.
• You cannot display markers when using [Focus Magnifier].
• The markers are displayed on the monitor or viewfinder. (You cannot output
the markers.)
Marker Settings
Sets the markers to be displayed while shooting movies.
MENU  (Camera Settings 2)  [ Marker Settings] 
desired setting.
Center: Sets whether or not to display the center marker in the center of
the shooting screen.
[Off]/ [On]
Aspect: Sets the aspect marker display.
[Off]/ [4:3]/ [13:9]/ [14:9]/ [15:9]/ [1.66:1]/ [1.85:1]/ [2.35:1]
Safety Zone: Sets the safety zone display. This becomes the standard
range that can be received by a general household TV.
[Off]/ [80%]/ [90%]
Guideframe: Sets whether or not to display the guide frame. You can
verify whether the subject is level or perpendicular to the ground.
[Off]/ [On]
Hint
• You can display several markers at the same time.
• Place the subject on the cross point of the [Guideframe] to make a balanced
composition.