Sony alpha 9 III - Registering the current focus area (AF Area Registration)

ILCE-9M2
5-010-473-11 (1)
GB
61
Shooting
C:\5010473111\5010473111ILCE9M2IN5\01GB-ILCE9M2IN5\030BAS.indd
DTP data saved: 2019/07/26 13:31
PDF file created: 2019/08/06 10:22
Setting the start position to track by touch operation
([Touch Tracking] under [Func. of Touch Operation])
You can set the subject to track by touching it on the monitor (page95).
• This function is available in still image shooting mode and movie
shooting mode.
• This function is available when [Focus Mode] is set to [Single-shot AF],
[Continuous AF], or [DMF].
Changing the setting for [Focus Area] to [Tracking]
temporarily ([Tracking On] under [ Custom Key])
Even [Focus Area] is set to other than [Tracking], you can temporarily
change the setting for [Focus Area] to [Tracking] while pressing and
holding the key to which you have assigned [Tracking On] function.
• Assign the [Tracking On] function to a desired key using
[
Custom Key] in advance (page179).
• This function is available in still image shooting mode.
• This function is available when [Focus Mode] is set to [Continuous AF].
Registering the current focus area ( AF Area Registration)
You can move the focusing frame to a preassigned position temporarily
using a custom key. This function is useful when shooting scenes in which
the subject’s movements are predictable; for example, sports scenes.
With this function, you can switch the focus area quickly according to the
situation.
How to register a focus area

MENU  (Camera Settings 1)  [ AF Area Registration]
 [On].

Set the focus area to the desired position and then hold
down the Fn(Function) button.