Sony alpha 9 III - Transferring images from the camera to a smartphone

ILCE-9M2
5-010-473-11 (1)
GB
207
Using network functions
C:\5010473111\5010473111ILCE9M2IN5\01GB-ILCE9M2IN5\070WRL.indd
DTP data saved: 2019/07/26 13:31
PDF file created: 2019/08/06 10:23
Transferring images from the camera to a smartphone
You can transfer still images and XAVC S movies to a smartphone.
However, images that are not saved on the camera’s memory card cannot
be transferred.
1
On the camera, play back an image that you want to transfer to
the smartphone.
2
Connect the camera to the smartphone.
Images shot with the camera are transferred to the smartphone.
• To establish a one-touch connection with an NFC-enabled
smartphone, touch the smartphone to the
(N-Mark) on the camera
(page205). If you are using an Android smartphone, touch the
(N-Mark) on the camera to the (N-Mark) on the smartphone.
• To establish a Wi-Fi connection with the smartphone using a QR code,
select MENU 
(Network)  [Send to Smartphone Func.] 
[Send to Smartphone] and display the QR code on the monitor of the
camera, then scan the QR code using Imaging Edge Mobile on the
smartphone.
• The transferred images are saved to a gallery or album on the
Android, or to an album on the iPhone or iPad.
Hint
• You can select images and transfer them to the smartphone while the camera
is turned off by setting MENU 
(Network)  [Send to Smartphone Func.]
 [Cnct. during Power OFF] to [On].
Note
• If you scan the QR code displayed under MENU  (Network) 
[Ctrl w/ Smartphone]  [
Connection], the function for using the
smartphone as a remote control for the camera will be activated (page 206).
To transfer images, select [Send to Smartphone] and display the QR code.
• For details on which file formats of still images and movies are transferable,
refer to the “Help Guide” (page2).