ILCE-9M2
5-010-473-11 (1)
GB
180
C:\5010473111\5010473111ILCE9M2IN5\01GB-ILCE9M2IN5\060SET.indd
DTP data saved: 2019/07/26 13:31
PDF file created: 2019/08/06 10:23
The following is the procedure for assigning the [Eye AF] function to the
AEL button.
1
MENU (Camera Settings 2) [ Custom Key].
• If you want to assign a function to recall while shooting movies,
select [
Custom Key]. If you want to assign a function to recall while
playing back images, select [
Custom Key].
2
Move to the [Rear1] screen using the left/right side of the
control wheel. Then, select [AEL Button] and press the center of
the control wheel.
3
Press the left/right side of the control wheel until [Eye AF] is
displayed. Select [Eye AF], and then press the center.
• If you press the AEL button in the still image shooting mode and eyes
are detected, [Eye AF] will activate, and the camera will focus on the
eyes. Shoot images while holding down the AEL button.
Note
• You can also assign shooting functions to the focus hold button on the lens.
However, some lenses do not have a focus hold button.
• If you assign [Follow Custom ( )] to a custom key using [ Custom Key],
but the function is one that is unavailable in the movie shooting mode such
as [
JPEG Quality] or [Flash Mode], the function will not be recalled when
you press the key in the movie shooting mode.
• If you assign [Follow Custom ( / )] to a custom key using
[
Custom Key], the camera will switch to the shooting mode and recall the
assigned function when you press the key in the playback mode.