ILCE-9M2
5-010-473-11 (1)
GB
147
Shooting movies
C:\5010473111\5010473111ILCE9M2IN5\01GB-ILCE9M2IN5\040MOV.indd
DTP data saved: 2019/07/26 13:31
PDF file created: 2019/08/06 10:23
• In [Program Auto] mode when shooting movies, the aperture value and the
shutter speed will be set automatically and cannot be changed. For that
reason, the shutter speed may become fast in a bright environment, and
the motion of the subject may not be recorded smoothly. By changing the
exposure mode and adjusting the aperture value and the shutter speed, the
motion of the subject can be recorded smoothly.
• When shooting movies, ISO values between ISO100 and ISO102400 are
available. If the ISO value is set to a value larger than ISO102400, the setting
is automatically switched to ISO102400. When you finish recording the movie,
the ISO value returns to the original setting.
• In movie shooting mode, ISO sensitivity can be selected from ISO100 to
ISO102400. If the ISO value is set to a value smaller than ISO100, the setting
is automatically switched to ISO100. When you finish recording the movie, the
ISO value returns to the original setting.
• In movie shooting mode, the following settings cannot be set in
[Picture Effect]. When a movie recording starts, [Off] will be set temporarily.
– Rich-tone Mono.
• The Face Detection function/Eye Detection function is not available in the
following situations.
– [ File Format] is set to [XAVC S 4K], [ Record Setting] is set to
[30p 100M]/[25p 100M] or [30p 60M]/[25p 60M], and [
4K Output Select]
is set to [Memory Card+HDMI]
• If you point the camera at an extremely strong light source while shooting
a movie at low ISO sensitivity, the highlighted area in the image may be
recorded as a black area.
• If the display mode of the monitor is set to [For viewfinder], the display mode
will switch to [Display All Info.] when movie shooting starts.
• Use PlayMemories Home when importing XAVC S movies and AVCHD movies
to a computer.
Movie w/ shutter
You can start or stop recording movies by pressing the shutter button,
which is bigger and easier to press than the MOVIE (Movie) button.
MENU (Camera Settings 2) [Movie w/ shutter]
desired setting.
On: Enables movie recording using the shutter button when the shooting
mode is set to [Movie] or [S&Q Motion].
Off: Disables movie recording using the shutter button.