ILCE-9M2
5-010-473-11 (1)
GB
198
C:\5010473111\5010473111ILCE9M2IN5\01GB-ILCE9M2IN5\060SET.indd
DTP data saved: 2019/07/26 13:31
PDF file created: 2019/08/06 10:23
TC Output
Sets whether or not to layer the TC (time code) information on the
output signal via the HDMI terminal when outputting the signal to other
professional-use devices.
This function layers the time code information on the HDMI output signal.
The product sends the time code information as digital data, not as an
image displayed on the screen. The connected device can then refer to
the digital data to recognize the time data.
MENU (Setup) [HDMI Settings] [ TC Output]
desired setting.
On: Time code is output to other devices.
Off: Time code is not output to other devices.
Note
• When [ TC Output] is set to [On], the image may not be output properly to
the TV or recording device. In such cases, set [
TC Output] to [Off].
REC Control
If you connect the camera to an external recorder/player, you can
remotely command the recorder/player to start/stop recording using the
camera.
MENU (Setup) [HDMI Settings] [ REC Control]
desired setting.
On: The camera can send a recording command to an external
recorder/player.
The camera is sending a recording command to an external
recorder/player.
Off: The camera is not able to send a command to an external recorder/
player to start/stop recording.
To Next Page
