ILCE-9M2
5-010-473-11 (1)
GB
210
C:\5010473111\5010473111ILCE9M2IN5\01GB-ILCE9M2IN5\070WRL.indd
DTP data saved: 2019/07/26 13:31
PDF file created: 2019/08/06 10:23
Hint
• The Bluetooth connection is only active while you are operating the camera
using the Bluetooth remote commander.
• If the function does not work properly, check the following notes and then try
pairing again.
– Confirm that the camera is not connected with other devices using the
Bluetooth function.
– Confirm that [Airplane Mode] for the camera is set to [Off] (page226).
– Execute [Reset Network Set.] of the camera.
Note
• When you initialize the camera, the pairing information is also deleted. To use
the Bluetooth remote commander, perform pairing again.
• If the Bluetooth connection is unstable, remove any obstacles, such as people
or metal objects from between the camera and the paired Bluetooth remote
commander.
• You cannot use the function for linking location information with a
smartphone while [Bluetooth Rmt Ctrl] is set to [On].
• You cannot use an infrared remote commander while [Bluetooth Rmt Ctrl] is
set to [On].
• While [Bluetooth Rmt Ctrl] is set to [On], the camera will not switch to the
power-saving mode. Change the setting to [Off] when you are done using the
Bluetooth remote commander.
To Next Page
Loading...
