ILCE-9M2
5-010-473-11 (1)
GB
241
About this product
C:\5010473111\5010473111ILCE9M2IN5\01GB-ILCE9M2IN5\120OTH.indd
DTP data saved: 2019/07/26 13:31
PDF file created: 2019/08/06 10:23
Hint
• For how to check the amount of dust on the image sensor, and for further
details on cleaning methods, please refer to the following URL.
https://support.d-imaging.sony.co.jp/www/support/ilc/sensor/index.php
Note
• Clean the image sensor quickly.
• A blower is not supplied with this product. Use a commercially available
blower.
• Make sure that the remaining battery level is (3 remaining battery icons)
or more, before performing the cleaning.
• Do not use a spray type blower as it may scatter water droplets inside the
camera body.
• Do not put the tip of a blower into the cavity beyond the lens mount area, so
that the tip of the blower does not touch the image sensor.
• Hold the camera slightly face downward so that the dust falls out.
• Do not subject the product to any shock during cleaning.
• When cleaning the image sensor with a blower, do not blow too hard. If you
blow the sensor too hard, the inside of the product may be damaged.
• If the dust remains even after you cleaned the product as described, consult
the service facility.
To Next Page
Loading...
