EasyManua.ls Logo

Sony BDV-E500W - Specifications

Sony BDV-E500W
149 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
* Depending on the decoding mode settings
and
the
source, there may be no sound output.
Inputs (Digital)
TV
(OPTICAL) Impedance: -
SATICABLE (COAXIAL)
Impedan.:e: 75 ohms
::::s
0-
...
3
D)
-
o'
::::s
»
Q.
Q.
;::;:
::::s
-
530 kHz - 1,710 kHz (with
the interval set at
10kHz)
531
kHz-
1,710 kHz (with
the interval set at 9 kHz)
AM loop antenna (aerial)
450 kHz
PLL quartz-locked digital
synthesizer
NTSC
VIDEO: I Vp-p 75 ohms
COMPONENT:
Y: I Vp-p 75 ohms
Ps/Cs,
PR/CR:
0.7
Vp-p
75
ohms
HOMI OUT: Type A (19
pin)
Sensitivity: 450/250 mV
Impedance: 50 kilohms
Sensitivity: 450/250 mV
Impedance: 50 kilohms
Antenna (aerial)
Intermediate frequency
87.5 MHz - 108.0 MHz
(100 kHz step)
Antenna (aerial) FM wire antenna (aerial)
Antenna (aerial) terminals 75 ohms, unbalanced
Intermediate frequency 10.7 MHz
AM tuner section
Tuning range
FM tuner section
Tuning range
BDIOVD/CD System
Signal format system
Tuner Section
System
Video Section
Outputs
AUDIO (AUDIO IN)
Inputs (Analog)
TV (AUDIO IN)
Surround mode (reference) RMS output power
Front LlFront RlCenter*:
143
watts (per channel at 3
ohms, I kHz, 10% THO)
Subwoofer*: 285 watts (at
1.5
ohms, 80 Hz, 10%
THO)
Amplifier Section
(BDV-E500W)
POWER OUTPUT ANO TOTAL HARMONIC
DISTORTION:
(FTC Output Power)
for the
US
model
Front LlFront
R:
With 3 ohms loads, both
channels driven, from 180
- 20,000 Hz; rated 56 watts
per channel minimum
RMS power, with no more
than 0.7% total harmonic
distortion from 250 milli
watts to rated output.
U.S. models:
Surround mode (reference) RMS output power
Front LlFront RJCenter*:
143
watts (per channel at 3
ohms, 1 kHz, 10% THO)
Subwoofer*: 285 watts (at
1.5
ohms, 80 Hz, 10%
THO)
Amplifier Section
(BDV-T20W)
POWER OUTPUT ANO TOTAL HARMONIC
DISTORTION:
(FTC Output Power)
for the
US
model
Front LlFront
R:
With 3 ohms loads, both
channels driven, from 180
- 20,000 Hz; rated 56 watts
per channel minimum
RMS power, with
no
more
than 0.7% total harmonic
distortion from 250 milli
watts to rated output.
Surround mode (reference) RMS output power
Front LlFront RlCenter*:
142 watts (per channel at 3
ohms, I kHz, 10% THO)
Subwoofer*: 140 watts (at
1.5
ohms, 80 Hz, 10%
THO)
* Depending on the decoding mode settings and the
source, there may be no sound output.
Specifications
Other models:
Stereo mode (rated)
108
W +
108
W (at 3 ohms,
I kHz, I% THO)
105
US

Table of Contents

Other manuals for Sony BDV-E500W

Related product manuals