You can use the following buttons to enter
characters.
~
[Easy
Setup]
Buttons
RED
[Letter Type]
GREEN
[Ala]
BLUE
[Symbol]
YELLOW
[Finish]
CLEAR
[Clear]/[Clear All]
RETURN
[Cancel]
Details
Switches the keyboard between
alphabet and numbers.
Switches the keyboard between
upper case and lower case.
Displays the keyboard for
symbols.
The input is entered, and the
system returns to the previous
display.
Erases the character to the right
of
the cursor.
To
erase all displayed characters,
press and hold CLEAR for 2
seconds
or
more.
Returns to the previous display,
canceling the input.
• Select an input function using
+-/'t/-4,/-+,
and press O .
• Enter characters as follows:
G)Select a character selection
panel using
+-/'t/-4,/-+,
and press
CD.
®Select
a character using
+-1-+,
and press o.
You can recall the Easy Setup to make the basic
settings.
1 Press
+-1-+
to select [Start], then press
8.
2 Follow the instructions for "Step
4:
Performing the Easy Setup" (page 34)
from step
4.
-
89
uS
To Next Page
Loading...
