8 Confirm the conclusions of [Auto
Calibration].
The conclusions appear on the
TV
screen.
Press
~H
to change the page. The first page
shows the distance
of
speakers.
The
second
page shows the level
of
speakers.
..
• If measurement fails, follow the message then
retry [Auto Calibration].
mI
• You can change a measurement unit (feet
or
meters) by pressing the color button (RED).
9 Press ",/oJ, to select [OK] or [Cancel],
then press
G.
• The measurement is OK.
Disconnect the calibration mic, then select
[OK].
The
result is implemented.
• The measurement is not OK.
Follow the message, then select [OK] to
retry.
..
• While the Auto Calibration function works:
- do not turn off the power.
- do not press any button.
- do not change the volume.
- do not change the function.
- do not change the disc.
- do not insert or eject a disc.
- do not connect the headphones to the surround
amplifier.
- do not disconnect the calibration mic.
Setting
the
Speakers
[Speaker Settings]
To
obtain the best possible surround sound, set
connection
of
the speakers and their distance
from your listening position. Then use the test
tone to adjust the level and the balance
of
the
speakers to the same level.
1 Press HOME.
The
home menu appears
on
the
TV
screen.
2 Press
+-1-+
to
select;;;
[Setup].
3 Press
",/OJ,
to select [Audio Settings],
then press
G.
4 Press ",/oJ, to select [Speaker Settings],
then press
G.
The
[Speaker Settings] display appears.
5 Press
",/OJ,
to select the item, press
G.
Setup the following settings.
• [Connection]
If
you do not connect center
or
surround
speakers, set the parameters for [Center] and
[Surround]. Since the front speaker and
subwoofer settings are fixed, you cannot change
them.
When
you use the Wireless Surround Speaker
Kit (W
AHT
-SBPI, optional) for the surround
back speakers (page 17), set [Surround Back]
also.
[Front]
[Yes]
[Center]
[Yes]: Normally select this.
[None]: Select this
if
no center speaker is used.
[Surround]
[Yes]: Normally select this.
[None]: Select this
if
no surround speaker is
used.
[Surround
Back]
[Yes]: Select this
if
surround back speakers are
used.
[None]: Select this
if
no surround back speaker
is used.
-
9
=r
CD
...
o
't:J
CD
OJ
-
C)"
j
rn
71
us
To Next Page
Loading...
