Step
2:
Connecting
the
System
For connecting the system, read the information on the following pages.
Do not connect the AC power cord (mains lead)
of
the unit to a wall outlet (mains) until all the other
connections are made.
om
• When you connect another component with a volume control, turn down the volume
of
the other components to a
level where sound is not distorted.
The connector
of
the speakercords and the color tube are color-coded depending
on
the type
of
speaker.
Connect the speaker cords to match the color
of
the SPEAKERjacks
of
the unit.
Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with
the color tube to
<±),
and the speaker cord without the color tube to
8.
Do not catch the speaker cord
insulation (rubber covering) in the speaker terminals.
22
US
To Next Page
Loading...
