72
US
[Subwoofer]
[Yes]
• [Distance]
When you move the speakers, be sure to set the
parameters
of
the distance
(0)
from the
listening position
to
the speakers.
You can set the parameters from 0
to
23 feet (0.0
to 7.0 meters).
The speakers in the illustration correspond to the
following:
CDCenter speaker
®Front
left speaker (L)
@Front
right speaker (R)
0Subwoofer
®SuITound left speaker (L)
®SuITound right speaker (R)
0SuITound
back left speaker (L) (optional)
@SuITound back right speaker (R) (optional)
[Front Left/Right]
10
ft/3.0 m: Set the front
speaker distance.
[Center]*
10
ft/3.0
m:
Set the center speaker
distance.
[Surround Left/Right]*
lO
ft/3.0
m:
Set the
surround speaker distance.
[Surround Back Left/Right]*
lO
ftl3.0
m:
Setthe
surround back speaker distance.
[Subwoofer]
lO
ft/3.0
m:
Set the subwoofer
distance.
* This item appears when you set to [Yes]
in
the
[Connection] setting.
-
• Depending on the input stream, [Distance] may not
be effective.
iiI!J
• You can change a measurement unit (feet
or
meters)
by
pressing the color button (RED).
• [Level]
You can adjust the sound level
of
the speakers.
You can set the parameters from
-6.0
dB
to +6.0
dB. Be sure to set [Test Tone] to [On] for easy
adjustment.
[Front Left/Right] 0.0 dB: Set the front speaker
level.
[Center]* 0.0 dB: Set the center speaker level.
[Surround Left/Right]* 0.0 dB: Set the surround
speaker level.
[Surround Back Left/Right]
*0.0 dB: Set the
surround back speaker level.
[Subwoofer] 0.0 dB: Set the subwoofer level.
* This item appears when you set to [Yes]
in
the
[Connection] setting.
• [Test Tone]
The speakers will emit a test tone
to
adjust
[Level].
[Off]: The test tone
is
not emitted from the
speakers.
[On]: The test tone
is
emitted from each speaker
in
sequence while adjusting level. When you
select one
of
the [Speaker Settings] items, the
test tone is emitted from each speaker
in
sequence.
Adjust the sound level as follows.
1 Set [Test Tone] to [On].
2 Press
1-!oJ,
to select [Level], then press
8.
3 Press
1-!oJ,
to select the desired speaker
type, then press
8.
4 Press +-H to select the left or right
speaker, then press
1-!oJ,
to adjust the
level.
5 Press
8.
6 Repeat Steps 3 to
5.
7 Press RETURN.
The system returns to the previous display.
S Press
1-!oJ,
to select [Test Tone], then
press
8.
To Next Page
Loading...
