Sony BDV-E500W - Page 107

Amplifier Section (BDV-E500W)
AUDIO POWER SPECIFICATIONS
for the US model
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 3 ohms loads, both
channels driven, from 180
- 20,000 Hz; rated
50 watts
per channel minimum
RMS power, with no more
than 0.7% total harmonic
distortion from 250 milli
watts to rated output.
With 3 ohms loads, both
channels driven, from 180
- 20,000 Hz; rated 50 watts
per channel minimum
RMS power, with no more
than 0.7% total harmonic
distortion from 250 milli
watts to rated output.
Surround mode (reference) RMS output power
142 W (per channel at 3
ohms,
I kHz, 10% THD)*
* Depending on the source, there may be no sound
output.
-
S-AIR Specification
version 1.0
2.4000
GHz - 2.4835 GHz
DSSS
DC 3.3 V, 350 rnA
50 mm x 13 mm x 60 mm
(2 in x
17
/:'2 in x 2 ]/8 in) (wI
hId)
24 g (I oz)
3 - 16 Q
120 V AC, 60 Hz
On:
50W
85 mm x 100 mm x 330
mm (3
3
/8
in x 4 in x 13 in)
(w/h/d) (inc\. Wireless
transceiver)
85 mm
x 100 mm x 345
mm(3
3
/8inx4inx 13
5
/8
in) (w/h/d) inc\. speaker
cord
cover and speaker
cord holder
1.7 kg (31b
12 oz) inc\.
speaker cord cover and
speaker cord holder
Mass (approx.)
Frequency band
Modulation method
Power requirements
Dimensions (approx.)
Wireless transceiver (EZW-RT10/EZW-
RT10A)
Communication system
Mass (approx.)
General
Power requirements
Power consumption
Dimensions (approx.)
Rated impedance
• Standby power consumption 0.3 W.
• Halogenated flame retardants are not used
in the
certain printed wiring boards.
•
Over 85% power efficiency of amplifier block is
achieved with the full digital amplifier, S-Master.
Design and specifications are subject to change
without notice.
Other models:
Stereo mode (rated) 80 W
+ 80 W (at 3 ohms,
I kHz, I % THO)
Surround mode (reference) RMS output power
143 W (per channel at 3
ohms,
I kHz, 10% THD)*
* Depending on the source, there may be no sound
output.
U.S. models:
Surround mode (reference) RMS output power
143 W (per channel at 3
ohms, I kHz, 10% THD)*
120 V AC,
60 Hz
On: 120 W
Standby: 0.3 W (at the
Power Saving mode)
Dimensions (approx.)
LAN (100)
EXT
Output voltagelcurrent
(DIGITAL
MEDIA PORT)
DC 5 V/700 rnA
100BASE-TX Terminal
External memory slot (For
connecting the external
memory)
DC output: 5 V
500 rnA
Max
430 mm
x 93 mm x 400
mm (17 in x 3 ]/4 in x
15 ]/4 in) (w/h/d) inc\.
projecting parts
430 mm x 93 mm x 430
mm (17 in x 3 ]/4 in x 17
in) (w/hld) (inc\. Wireless
transceiver)
Mass (approx.) 5.4 kg
(II Ib 15 oz)
Surround amplifier (TA-SA1 OOWR)
Amplifier Section (BDV-T20W)
AUDIO POWER SPECIFICATIONS
for the US model
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
General
Power requirements
Power consumption
107
US