Copying still images from a mini DV tape - Photo save
To stop or end copying
Press MENU.
When the memory of the "Memory Stick" is full
MEMORY FULL appears on tile LCD screen or in the viewfinder, and tile copying
stops. Insert another "Memo1T Stick" and repeat the procedtue from step 2.
Image size of still images
Image size is automatically set to 640× 480.
When the access lamp is lit or flashing
Do not shake or strike your camcorder. As well do not turn tile power off, eject a
"Memory Stick" o1"remove tile battel T pack. Otherwise, tile image data breakdown n-lay
Occur.
If the write-protect tab on the "Memory Stick" is set to LOCK
NOT READY appears when you select tile item in tile menu settings.
When you change "Memory Stick"s in the middle of copying
Your eamcorder resumes copying from tile last image recorded on the previous
"Memory Stick."
3
R
g
©
o
119
To Next Page
