Using special effects - Digital effect
(1) In CAMERA mode, press DIGITAL EFFECT. The digital eflect indicator
appears.
(2) Turn the SEL/PUSH EXEC dial to select the desired digital effect mode.
The indicator changes as follows:
STILL _ FLASH _ LUMI. _ TRAIL _ SLOW SHTR _ OLD MOVIE
(3) Press tile SEL/PUSH EXEC dial. The indicator lights up and the bars appear.
In the STILL and LUMI. modes, the still image is stored in memory.
(4) Turn the SEL/PUSH EXEC dial to adjust the effect.
Items to be adjusted
STILL The rate of tbe still image you want to superimpose on the moving
picture
FLASH The interval of"flash motion
LI IMI. The color scheme of the area in the still image wbich is to be
swapped with a moving picture
TRAIL The time until the incidental image vanishes
SLOW SHTR Shutter speed. The larger the shutter speed number, the slower the
shutter speed.
OLD MOVIE No adjustment necessary
The more bins there are on the screen, the stronger the digital effbct. The bars
appear in the following modes: STILL,FLASH, LUMI. and TRAIL.
_ LUMI.
4
To cancel the digital effect function
Press DIGITAL EFFECT.
4O
To Next Page
Loading...
