Sony DCR-PC110 - Memory Stick Issues

Troubleshooting
Symptom
The "Memory Stirk" does not
function.
Recording does not function.
Causeand/or CorrectiveActions
• Tile POWER switch is not set to MEMORY.
-) Set it to MEMORY. (p. 96)
• Tile "Memory Stick" is not inserted.
") Insert a "Memo1T Stick". (p. 95)
• Tile "Memory Stick" has already been recorded to its full
capacity.
") Delete unnecessary images and record again. (p. 135)
• Tile "Memory Stick" formatted incorrectly is inserted.
+ Format tile "Memo_T Stick" or use another "Memo_T
Stick. " (p. 88)
• The write protect tab on tile "Memory Stick" is set to
LOCK.
") Release the lock. (p.93)
The image cannot be deleted. • Tile image is protected.
") Cancel image protection. (p. 134)
• The write protect tab on tile "Memory Stick" is set to
LOCK.
") Release the lock. (p.93)
Youcannot format tile "Memory • Tile write protect tab on tile "Memory Stick" is set to
Stick". LOCK.
") Release the lock. (p.93)
Deleting alltile images cannot be • Tile write protect tab on the "Memory Stick" is set to
carried out. LOCK.
") Release the lock. (p.93)
Youcannot protect tile image. • Tile write protect tab on the "Memory Stick" is set to
LOCK.
") Release the lock. (p.93)
• The image to protect is not be played back.
") Press MEMORY PLAY to play back the image. (p. 120)
Youcannot write a print mark on tile • The write protect tab on the "Memory Stick" is set to
still image. LOCK.
") Release the ]ock. (p. 93)
• The image to write a print mark is not be played back.
") Press MEMORY PLAY to play back the image. (p. 120)
The photo save ftmction does not • The write protect tab on the "Memory Stick" is set to
work. LOCK.
") Release the lock. (p.93)
(continued on the following page)
{D.
o
5"
145