Recording a picture
Note
When nsing the LCD screen except in tile mi]ror mode, tile viewfinder atnomatieally
turns off.
When you use the LCD screen outdoors in direct sunlight
Tile LCD screen may be difficult to see. If this happens, we recommend that yon use tile
viewfinder.
When you adjust angles of the LCD panel
Make sure if the LCD panel is opened up to 90 degrees.
Picture in the mirror mode
The picture on the LCD screen is a mirror image. However, the picture will be normal
when recorded.
During recording in the mirror mode
ZERO SET MEMORY on the Remote Commander does not work.
Indicators in the mirror mode
The STBY indicator appears as IlID and REC as 0. Some of the other indicators appear
mirror reversed and others are not displayed.
When recording with the LCD panel opened
Recording time becomes shorter a little compared with when recording with the LCD
panel closed.
LCD screen backlight
You can adjust the brightness of the backlight. Select LCD B.L. in the menu settings
(p. 84).
Even if you adjust the LCD screen backlight or brightness of the LCD screen
The recorded picture will not be aff_eted.
O
E
(,Q
I
5
17
To Next Page
Loading...
