Recording a still image on a tape - Tape Photo recording
You can record still images on tapes with tile self timer. This mode is usefl/l when you
want to record yourself. You can also use the Remote Commander for this operation.
(1) Press _ (self'timer) in the standby mode. The @ (self'timer) indicator appears
on the LCD screen or in the viewfinder.
(2) Press PHOTO firmly.
Self timer starts counting down fl'om 10 with a beep sound. In the last
2seconds of the countdown, the beep sound gets fhster, then recording starts
automatically.
PHOTO
To cancel self-timer recording
Press _ (self'timer) so that the _ indicator disappears fl'om the LCD screen or in the
viewfinder while your camcorder is in the standby mode. You cannot cancel the self"
timer recording usiI'_g the Remote Commander.
Note
The self timer recording mode is automatically canceled when:
Self timer recording is finished.
The POWER switch is set to OFF (CHG) or VCR.
32
To Next Page
Loading...
