Changing the menu settings
Icon/item
WORLD TIME
COMMANDER
DISPLAY
REC LAMP
POWER
Mode Meaning switch
To set the clock to the local time. CAMERA
Turn the SEL/PUSH EXEC dial to set a time MEMORY
difference. The clock changes by the time
difference yon set here. If yon set the time
difference to 0, the clock returns to the originally
set time.
BEEP • MELODY To output the melody when you start/stop VCR
recording or when an unusual condition occurs CAMERA
on your camcorder. MEMORY
NORMAL To output the beep instead of the melody.
OFF To cancel all sound including shutter sound.
• ON To activate the Remote Conm-lander supplied VCR
with yonr camcorder. CAMERA
OFF To deactivate the Remote Commander to avoid MEMORY
remote control n-dsoperation caused 173,other
VCR's remote control.
• LCD To show the display on the LCD screen and in VCR =o
the viewfinder. CAMERA
V OUT/LCD To show the display on the TV screen, LCD MEMORY _.
screen and in the viewfinder.
_a
• ON To light np the camera recording lamp at the CAMERA
front of yonr camcorder. MEMORY
OFF To tnrn the can-lera recording lan-lp off so that _"
the person is not aware of the recording, o
VIDEO EDIT To make program and perform video editing VCR
(p. 66).
EDITSET To adjust and set the synchronicity of yonr VCR
camcorder and a VCR for dubhing in edit set
mode (p. 59).
Note
If you press DISPLAY with DISPLAY set to V OUT/LCD in the menu settings, the
picttu e fi'om a TV or VCR will not appear on the LCD screen even when yotu
camcorder is connected to outputs on the TV or VCR.
When recording a closesubject
When REC LAMP is set to ON, the red camera recording lamp on the front of the
camcorder may reflect on the sutojectif it is close. In this case. we recommend you set
REC LAMP to OFF.
In more than 5 minutes after removing the power source
The PROGRAM AE, WHT BAL, FLASH LVL, HiFi SOUND, AUDIO MIX and
COMMANDER items are returned to their default settings.
The other menu items are heM in memory even when the battery is removed.
91
To Next Page
Loading...
