Using a "Memory Stick" - introduction
You can select either one of two image sizes
Still images: 1152 × 864 or 640 × 480. (Tile image size in VCR mode is automatically set
to 640 × 480.)
Tile default setting is 1152 × 864.
Moving pictmes: 320 x 240 or 160 × 112
Tile default setting is 320 × 240.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
the right (unlock) position.
(2) Press MENU to display the menu.
(3) Turn the SEL/PUSH EXEC dial to select _, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select STILL SET (still image) or MOVIE
SET (moving picture), then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select IMAGESIZE, then press the dial.
(6) Turn the SEL/PUSH EXEC dial to select the desired image size, then press the
dial.
The indicator changes as fMlows:
Still images: 1L--_152 _ _0
Moving pictures: _320 _ _160
98
To Next Page
Loading...
