47
GB
Printing using a TV monitor (MONITOR OUT mode)
3 Adjust the size and position of the
stamp.
For information on adjustment, see
step 8 on page 45.
To cancel the operation
Press CANCEL. The window of the
previous step is displayed.
4 Press the arrow (B/b/V/v) button
to select “Execute” and then press
ENTER.
The selected stamp is pasted on the
image.
x Adding a message
1 Press the arrow (B/b/V/v) button
to select
(Message) and press
ENTER.
The message selection window is
displayed.
2 Press the arrow (B/b/V/v) button
to select the desired message, then
press ENTER.
The character color selection
window is displayed.
3 Press the arrow (B/b/V/v) button
to select the desired color and then
press ENTER.
The window used for adjusting the
message size and position is
displayed.
To cancel the operation
Press CANCEL. The window of the
previous step is displayed.
4 Adjust the size and position of the
message.
For information on adjustment, see
step 8 on page 45.
5 Press the arrow (B/b/V/v) button
to select “Execute” and then press
ENTER.
The selected message is pasted on
the image.
Continued
To Next Page
Loading...
