66
GB
• When “Manual” is selected:
The image with the cursor in the
image list is displayed. To
switch images, press the arrow
(B/b/V/v) button. The image to
the left, right, above, or below
the current image in the image
list will be displayed.
To stop slideshow
Press CANCEL.
Notes
• Depending on the image, it may take time
to be displayed.
• You cannot display the images that are not
displayed as thumbnails because they are
damaged or for some other reason.
Printing a displayed image
While playing the slideshow manually,
you can print a displayed image.
1
Press PRINT.
The dialog box to specify the print
quantity is displayed.
2
Set the print quantity.
• To increase the print quantity
one by one, press ENTER
repeatedly.
• To reduce the print quantity one
by one, press CANCEL
repeatedly.
• To reset the print quantity to
one, press CANCEL for more
than two seconds.
3
Press the arrow (B/b/V/v)
button to select “OK” to start
printing.
The image previewed is printed.
To stop printing
Press CANCEL. When you are
printing multiple copies, the next
printing after the one currently
printing will be cancelled.
To Next Page
Loading...
