Sony DSR-2000A - Head Cleaner Solenoid Replacement

7-62
DSR-2000A/2000AP
7-22. Head Cleaner Solenoid Replacement
Outline
Replacement
Removing the head cleaner assembly
Replacing the head cleaner solenoid
Reattaching the head cleaner assembly
Checking the performance of the head cleaner assembly
Preparation
1. Set the unit to the unthreading end status.
2. Power off the unit.
3. Remove the top panel. (Refer to Section 3-3.)
Tools
. Torque screwdriver’s bit (for M1.4) : J-6325-110-A
. Torque screwdriver (for 3 kgf.cm) : J-6325-400-A