Sony DSR-2000A - Servo Adjust

5-21
DSR-2000A/2000AP
5-3-3. Servo Adjust
Checks the servo system automatically or semi-automatically.
Operating procedure
1. Enter the maintenance menu.
2. Move the cursor to “SERVO ADJUST” which is displayed
with a white background using the [AUDIO|IN] (↑), [IN] (↓)
keys.
3. Press the [ENTRY] (→) key.
“SERVO ADJUST” is selected and its lower-layer submenu
appears.
4. Move the cursor displayed with a white background to a
desired item using the [AUDIO|IN] (↑), [IN] (↓) keys.
5. Press the [ENTRY] (→) key to select the desired item.
(Refer to the respective menu description for the adjustment
procedure.)
6. Press the [SET] key to execute the selected menu.
7. After completing the adjustment, press the [DELETE] (←)
key to return to the main menu.
8. To check other menus and submenus, repeat steps 4 to 7.
9. Press the [MENU] key to exit the maintenance menu.
n
If the [MENU] key is pressed while the adjustment is in progress,
the adjustment operation is forcibly ended and the display returns
to the main menu.