5-7
DSR-2000A/2000AP
5-3-2. Servo Check
Checks the servo system automatically or semi-automatically.
Operating procedure
1. Enter the maintenance menu.
2. Move the cursor to “SERVO CHECK” which is displayed
with a white background using the [AUDIO|IN] (↑), [IN] (↓)
keys.
3. Press the [ENTRY] (→) key.
“SERVO CHECK” is selected and its lower layer submenu
appears.
4. Move the cursor displayed with a white background to a
desired item using the [AUDIO|IN] (↑), [IN] (↓) keys.
5. Press the [ENTRY] (→) key.
The lower layer submenu appears.
6. Move the cursor displayed with a white background to a
desired item using the [AUDIO|IN] (↑), [IN] (↓) keys.
7. Press the [ENTRY] (→) key to select the desired item.
8. Press the [SET] key to execute the selected item.
9. After completing the check, press the [MENU] key to return
to the main menu.
10. To check other menus and submenus, repeat steps 4 to 9.
11. Press the [MENU] key to exit the maintenance menu.
n
If the [MENU] key is pressed while the check is in progress, the
check operation is forcibly ended and the display returns to the
main menu.
To Next Page
Loading...
