2-6
DSR-2000A/2000AP
2-8-2. Input/Output Signals of the Connectors
INPUT
REF.VIDEO : BNC x2 (loop-through)
NTSC black burst, 0.286 V p-p, 75 Z, sync negative
PAL black burst, 0.3 Vp-p , 75 Z sync negative
VIDEO IN : BNC x2 (loop-through)
Composite, 1.0 V p-p, 75 Z, sync negative
COMPONENT VIDEO : BNC x3
Y : 1.0 V p-p, 75 Z, sync negative
R-Y/B-Y : 0.7 V p-p, 75 Z (NTSC : 75 % PAL : 100 %)
S VIDEO : DIN 4P x1
Y : 1.0 V p-p, 75 Z, sync negative
C : NTSC 0.286 V p-p (burst level), 75 Z
PAL 0.3 V p-p (burst level), 75 Z
SDI INPUT : BNC x2 (active-through)
Serial digital interface format (270 Mbps),
SMPTE 259M (NTSC)/ITU-R BT.656 (PAL)
SDTI (QSDI) : BNC x1
Serial data transport interface
(DVCAM compression signal : Video + Audio + TC signal)
SMPTE 305M/322M
AUDIO IN : XLR 3P x4, FEMALE
Reference level switchable (_6/0/+4 dBu), 600 Z ON/OFF/_60 dBu switchable,
balanced (High impedance)
DIGITAL AUDIO (AES/EBU) : BNC x2 (conformed with AES-3id-1995)
TIME CODE : BNC x1
SMPTE (NTSC)/EBU (PAL)
0.5 to 18 V p-p, 3.3 kZ, unbalanced
i.LINK : IEEE1394 connector 6P x1
To Next Page
Loading...
