2-7
DSR-2000A/2000AP
OUTPUT
REF.VIDEO : BNC x1
NTSC composite sync, 0.286 V p-p, 75 Z, sync negative (with burst signal)
PAL composite sync, 0.3 V p-p, 75 Z, sync negative (with burst signal)
VIDEO OUT1, 2, 3(SUPER) : BNC x3
Composite, 1.0 V p-p, 75 Z, sync negative
COMPONENT VIDEO : BNC x3
Y : 1.0 V p-p, 75 Z, sync negative
R-Y/B-Y : 0.7 V p-p, 75 Z (NTSC : 75 % PAL : 100 %)
S VIDEO : DIN 4P x1
Y : 1.0 Vp-p, 75 Z, sync negative
C : NTSC 0.286 V p-p (burst level), 75 Z
PAL 0.3 V p-p (burst level), 75 Z
SDI OUTPUT1, 2, 3(SUPER) : BNC x3
Serial digital interface format (270 Mbps),
SMPTE 259M (NTSC)/ITU-R BT.656 (PAL)
SDTI (QSDI) : BNC x1
Serial data transport interface
(DVCAM compression signal : Video + Audio + TC signal)
SMPTE 305M/322M
AUDIO OUT : XLR 3P x4, MALE
+4 dBu, 600 Z load, balanced (low impedance)
MONITOR AUDIO : PHONO JACK x1
_11 dBu, 47 kZ load, unbalanced
DIGITAL AUDIO : BNC x2 (conformed with AES-3id-1995)
TIME CODE : BNC x1
SMPTE (NTSC)/EBU (PAL)
2.2 V p-p ±3.0 dB, 600 Z, unbalanced
i.LINK : IEEE1394 connector 6P x1
HEADPHONES : Stereo phone jack x1
_∞ to _13 dBu, 8 Z, unbalanced
HD SDI OUT (DSBK-2020) : BNC x2
HD serial digital interface
SMPTE 292M
To Next Page
Loading...
