4-18
DSR-2000A/2000AP
REC
While pressing the record proof sensor on the right side of
the T side reel table, press both the [PLAY] key and the
[REC] key.
The pinch roller is pressed against the capstan shaft to
enter REC status.
When the record proof sensor is released, the REC status is
released and the recorder returns to PLAY status.
Unthreading
Press the [EJECT] key.
Each guide moves to the specified position to complete the
unthreading.
Reel position selection
Press the [STANDBY] key on the control panel.
Reel position will be changed as shown below in accor-
dance with the number of pressing the [STANDBY]
switch.
n
Make sure to turn off switches S101-3 and 4 on the
SV-212 board after the adjustment.
Mini MSTD
To Next Page
Loading...
