Help Guide
IC Recorder
ICD-TX800
Changing a file name
You can change the name of the files stored under “
Recorded Files” on the HOME menu by adding one of the prefix
templates.
Operate the remote control and follow the steps below:
Note
You cannot change the name of a protected file. To change the name of a protected file, remove the protection from the file first,
then change the name. For instructions on removing protection, see Protecting a file.
You cannot change the name of files in “
Music.”
Related Topic
Changing a folder name
4-699-323-32(1) Copyright 2017 Sony Corporation
Operate the remote control to select the file that you want to rename.
1
While playback is on standby, select “Change File Name” on the OPTION menu, and then press
.
2
Press
or to select the desired prefix, and then press .
“Please Wait” appears on the display window and the selected prefix and an underscore (_) will be added to the file
name.
Example (“Important” is added to the file 171010_0706.mp3): Important_171010_0706.mp3
3
To Next Page
