Help Guide
IC Recorder
ICD-TX800
Using the sleep timer (Sleep Timer)
If you set the sleep timer, your IC recorder will turn off automatically when the specified period of time expires.
Operate the remote control and follow the steps below:
Note
If the Auto Power Off function is turned on, your IC recorder may turn off before the time period specified for the sleep timer
expires.
Even if the recording delay function is turned on, your IC recorder will turn off when the time period specified for the sleep timer
expires.
Hint
To check the remaining time of the sleep timer, perform step 1 again. The remaining time appears. If you want to keep the setting,
select “Keep On.” To cancel the setting, select “Turn Off.”
Related Topic
Setting the time period before the IC recorder automatically turns off (Auto Power Off)
Using the recording delay function
4-699-323-32(1) Copyright 2017 Sony Corporation
Operate the remote control to select “
Settings” - “Common Settings” - “Sleep Timer” from the HOME
menu, and then press
.
1
Press
or to select the desired time period, and then press .
You can select “OFF” (default setting), “15min,” “30min,” “60min,” “90min,” or “120min.”
2
Press and hold BACK/HOME to return to the HOME menu.
To return to the screen before you displayed the HOME menu, press
STOP.
When the sleep timer is set, “
” appears on the playback/recording standby screen.
3
To Next Page
Loading...
