Sony ICD-TX800 - Reducing Noise During Recording (Recording Filter)

Help Guide
IC Recorder
ICD-TX800
Reducing noise during recording (Recording Filter)
With the Recording Filter function, you can reduce noise in the recordings.
Operate the remote control and follow the steps below:
Description of menu items
You can select one of the following items:
OFF:
Turns off the Recording Filter function.
NCF(Noise Cut):
Cuts high-frequency sounds except for human voices as well as low-frequency sounds (default setting).
LCF(Low Cut):
Cuts low-frequency sounds, including noise from projectors and roaring wind sounds.
Hint
To cancel the Recording Filter function setup process, select “OFF” in step 2.
4-699-323-32(1) Copyright 2017 Sony Corporation
Operate the remote control to select “
Settings” - “Recording Settings” - “Recording Filter” from the
HOME menu, and then press
.
1
Press
or to select “NCF(Noise Cut)” or “LCF(Low Cut),” and then press .
2
Press and hold BACK/HOME to return to the HOME menu.
To return to the screen before you displayed the HOME menu, press
STOP.
3
114