Help Guide
IC Recorder
ICD-TX800
Specifying a segment of a file to play repeatedly (A-B repeat)
You can specify the starting point A and the finishing point B in a file to play the segment between the specified points
repeatedly.
Operate the remote control and follow the steps below:
Note
If you specify the starting point A and then specify the same point as the finishing point B while playback is on standby, the
specified starting point A will be cancelled.
You cannot turn on the button-hold repeat playback function while the A-B repeat playback function is active.
Hint
To turn off the A-B repeat playback function and resume the normal playback, press
/ A-B again.
To change the segment specified for the A-B repeat playback function, resume the normal playback and then repeat steps 1 and
2 once again.
Related Topic
Selecting the playback mode
Repeatedly playing the current file (Button-hold repeat playback)
While playback is on standby or in progress, press
/ A-B on the remote control to specify the starting
point A.
1
Press
/ A-B again to specify the finishing point B.
The specified segment plays repeatedly.
2
To Next Page
Loading...
