Help Guide
IC Recorder
ICD-TX800
Starting recording when the IC recorder is turned off (One-push recording)
To start recording when your IC recorder is turned off, press
REC on the IC recorder. This turns on the IC recorder
and starts recording.
To stop recording, press
STOP.
Note
When the HOLD•POWER switch on your IC recorder is in the “HOLD” position,
REC is disabled.
Only
REC on your IC recorder activates the one-push recording function. REC on the remote control does not activate the
function.
4-699-323-32(1) Copyright 2017 Sony Corporation
To Next Page
