Sony ICP-X7000 - Basic Independent Key Transition Operations

101
Basic Independent Key Transition
Operations
Independent key transition operations are performed using
the transition control block, independent key transition
control block, or key fader control block.
Executing an independent key transition
(transition control block)
Independent key transition operations are performed using
the independent key transition execution section of the
transition control block. The same operations can also be
performed using the independent key transition control
block.
Independent key transition operations are not supported
using the transition control block (simple type).
The transition is
completed with the
key removed.
Example 1: When the independent key transition [AUTO TRANS]
button is pressed later
Transition
(wipe)
Independent key
transition (mix)
Note
The transition is
completed with the
key removed.
Example 2: When the common transition [AUTO TRANS]
button is pressed later
Transition (wipe)
Independent key
transition (mix)